Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Considering going to 3.727 gear/pinion in 6MT

FT_Monk · 06-24-2012, 12:59 AM

^^^ Only .6 inch taller measured from the center of the wheel. You can also lower the car to compensate for the taller tire. Even with the cost of lowering car, it is still much less risky and less costly then remove and replace trans gears.

06-24-2012, 12:59 AM	#60
FT_Monk Member Join Date: May 2012 Drives: Over the hill WRX Location: Socal Posts: 67 Thanks: 0 Thanked 10 Times in 9 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	^^^ Only .6 inch taller measured from the center of the wheel. You can also lower the car to compensate for the taller tire. Even with the cost of lowering car, it is still much less risky and less costly then remove and replace trans gears.