[gatorac]

Oil cooler with Mocal thermostatic adapter, braided -10 stainless lines and Mishimoto 19 row flat plate cooler. I put this together myself based on the ones that were available at the time. Most of them use the Mocal adapter. The importer for these is local to me so I just pop in and put the parts together from his inventory. Lines and cooler have been flushed out. Cooler sealed up with -10 caps. This was on my car for about 1.5 years and 40k miles. Lots of use and never an issue. I removed this from my car before selling it. $300 including shipping. $250 without the lines if you'd rather make your own.