[Kiske]

Fuck and Bump. Did my oil change today and noticed my shroud has melted.

-FBM kit
-Ceramic Coated and Wrapped pipes (DEI titanium exhaust wrap)
-Spal 12" slim fans with FBM aluminum fan shroud
-FBM radiator
-vented lower aluminum underbody panel
-custom grill opening and ducting
-19 row oil cooler
-PTP Lava Turbo Blanket
-DEI Hose Fire Shield (on oil lines)
-OEM wrx liquid oil cooler
-Removed weatherstripping on cowl for ventalation
-Functional STI fender vents, with cut fenders for ventalation
-Spencer Fabrication radiator bracked (leans the rad forward 2")

Oil temps in summer rarely exceede 215F.

From the best of my knowledge it appears that the PTP blanket is holding in the heat and just under it at the opening, the heat is collecting, which melted the rings on my fan assembly. A couple of the fan blades themselves are slightly warped but, the fan itself still seems to operating.