Quote:
Originally Posted by Michael
What disks do you have? I did a search on and 18x9 +34 shows up as being available on T-disks and 18x.9.5 +39 as O-disks. Would that be correct? Do you have any angled pictures of the fronts that really show off the curves on the disks? Ideally, I want to run 0-disks all around with 18x8.5 +26 up front and either 18x9 +30 or 18x9.5 +39 (same as you have it) in the rear. My main concern is whether 18x8.5 x+26 O-disk will clear stock calipers up front. Below is a link to the post I made yesterday about this.
http://www.ft86club.com/forums/showp...postcount=3217 |
http://workwheelsusa.com/media/wheel...FR_2014_v1.pdf
There's nothing "angled" about the disk. I had T disk in front and O in rear.
The only difference between different disk type is the amount of lip you have. The face of the wheel remains the same, since it's a 3-piece wheel and not your typical 1-piece wheel.
-alex