Quote:
Originally Posted by RichardJ
Hey guys,
I'm doing the usual tweaks for every tune I'm going to load on my OFT, just came across the Stage 2 OFH specific tune.
I'm trying to implement the usual values for the quiet cold start, the exact same as seen in steve99's post.
According to his post, the tables that require editing are the following:
-Ignition Timing Post start
-MAF Correction After Start (In-Gear)
-MAF Correction After Start (Neutral)
-Idle Control
-and turning off the P050B Engine light..
It seems that both the MAF Correction tables are absent.
I triple checked that I am using the correct XML definition- ZA1JD00D.
Would I still achieve a quieter cold start with these tables alone?
Any help is appreciated  |
Yep the MAF correction after start tables and load limit tables are not in the standard oft defs.
Thet are probably in wayno's defs attached to his post.
if you don't do the maf offset tables the car will still idle very high even if you change the idle target tables.
however the oft guys do different calid changes to roms so check a few tables in your tune if your using wayno's defs and make sure everything looks ok, if theirs any weird values don't edit your tune. see the romraider tips link below