So I finally found it and I noticed one thing: when the clutch is fully depressed it only pushes in about 2/3 the plunger.
On second thought maybe the switch IS bad because I just noticed this post:
Quote:
|
Originally Posted by extrashaky
(3) Measure the gap shown in the figure with the clutch pedal fully depressed.
Normal clearance : 3.5 to 4.0 mm {0.138 to 0.157 in}
|
So I assume that gap is normal. Maybe the switch is just going bad because it still works sometimes. I'll leave it up to the dealership I guess but I don't think I'll leave without them having ordered the part.