Quote:
Originally Posted by Twinz
I would like to know how people are getting -2 degrees front camber in CS. I know there is a little variance from car to car, but that's a big gap.
My best guess at the TRD sways is that the front is ~70% stiffer than stock where the rear is only ~40% stiffer than stock. (Understeer)
I installed an ST front bar this week and used the softer setting (~40%) I'm hoping that the sway bar balance is stock-ish now. (-Feels better on the street, but I won't know if it's enough until I run it at 10/10 on the track)
|
Contact Infinite Motion in San Marcos CA. GAVIN does all the alignments. He must have figured something out.