View Single Post
Old 08-20-2016, 07:28 PM   #19
Twinz
Senior Member
 
Twinz's Avatar
 
Join Date: Jun 2016
Drives: 2016 FR-S MT, 2015 Scion FR-S AT,
Location: SW Fl
Posts: 487
Thanks: 271
Thanked 307 Times in 180 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by EN2_Squirrel View Post
All the CS guys I know have close to -2F/R and the same toe and are legal. They also have koni shocks with the insert, as well as the TRD springs and sways. that setup on re71r's is very good.

as for your alignment. the rear will have more grip in the corners. so when the front grip runs out, rear grip is still there= understeer. I play in SM with mine.
I would like to know how people are getting -2 degrees front camber in CS. I know there is a little variance from car to car, but that's a big gap.

My best guess at the TRD sways is that the front is ~70% stiffer than stock where the rear is only ~40% stiffer than stock. (Understeer)

I installed an ST front bar this week and used the softer setting (~40%) I'm hoping that the sway bar balance is stock-ish now. (-Feels better on the street, but I won't know if it's enough until I run it at 10/10 on the track)
Twinz is offline   Reply With Quote