Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - DIY

xxGiXxeRxx · 08-09-2016, 07:15 AM

I had this done almost 1 year ago. My clutch pedal is almost same level as brake with a little bit of slop. I am going to be installing either ACT HDD 6 puck clutch with Prolite FW/CM FX 400/South Bend stage 3 soon since it started slipping after turbo install. Will this mod affect the clutch engagement when I install new clutch? Do I need to re-adjust it?

I will also add the velox clutch fork and pivot bolt.

Any input is appreciated.

08-09-2016, 07:15 AM	#654
xxGiXxeRxx Member Join Date: May 2014 Drives: 2014 FRS Location: Texas Posts: 63 Thanks: 3 Thanked 19 Times in 12 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I had this done almost 1 year ago. My clutch pedal is almost same level as brake with a little bit of slop. I am going to be installing either ACT HDD 6 puck clutch with Prolite FW/CM FX 400/South Bend stage 3 soon since it started slipping after turbo install. Will this mod affect the clutch engagement when I install new clutch? Do I need to re-adjust it? I will also add the velox clutch fork and pivot bolt. Any input is appreciated.