Quote:
Originally Posted by DustinS
Reading back through your build thread (again). I noticed you made mention that the STi rear hub will bolt up to the Twins. Interested as I am looking to go RB later on and that will help with fitting wheels. Do I just need the bearing/hub assembly, or the entire rear upright? I figured just the hub/bearing, but figured I would double check. |
All you need is the bearing. p/n 28473FG010. You'll need to redrill the 114.3 into the brake disc. If you know someone with AP brakes, they have the 100 and 114.3 drilled into the bells so you could use those to mark out and drill yourself. The spigot diameter in the centre of the disc locates it, so you don't need silly accuracy..
For the front you'll need to drill the original hub or wait to see what I've gone and done...