Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

BRZ68 · 08-03-2016, 01:13 PM

Hi guys, I'm having idle dip problems when I push the clutch in coming to a stop. Sometimes it stalls and most of the time it recovers from the dip below 500rpms. I have the bov on the MAF pipe. I've already switched to the brown 12psi spring to keep the Bov shut at idle. I'm not sure if adding a 1/8" shim with the 12psi helps, just like what @Shit Luck did (post #566, page 42), we might have the same problem. The dip is more apparent when AC is On and fans kick in.

@JDLAutoDesign offered to send @Shit Luck an updated MAF pipe without the Bov, and a Bov flange to be moved to the intercooler. Did this solve the issue at all?

I'm running Delicious Tuning flash & go tune. Any input will be appreciated, thanks!

08-03-2016, 01:13 PM	#689
BRZ68 Member Join Date: Mar 2013 Drives: BRZ m/t Location: Metro Manila Posts: 61 Thanks: 56 Thanked 11 Times in 8 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Idle dip and stalling Hi guys, I'm having idle dip problems when I push the clutch in coming to a stop. Sometimes it stalls and most of the time it recovers from the dip below 500rpms. I have the bov on the MAF pipe. I've already switched to the brown 12psi spring to keep the Bov shut at idle. I'm not sure if adding a 1/8" shim with the 12psi helps, just like what @Shit Luck did (post #566, page 42), we might have the same problem. The dip is more apparent when AC is On and fans kick in. @JDLAutoDesign offered to send @Shit Luck an updated MAF pipe without the Bov, and a Bov flange to be moved to the intercooler. Did this solve the issue at all? I'm running Delicious Tuning flash & go tune. Any input will be appreciated, thanks!