I'm not sure whether if this has been brought up in this thread. I just want to make sure I'm on the right page with this. The CL fueling compensation table values adjustment can cause the Cl fueling to go richer or leaner than what is indicated on the OL fuel table, yes? Changing the value to 0 would cause the CL fueling to match that of the OL fuel map? Or am I oversimplifying.
OL fuel map:
CL Fuel comp:
Resulting Cl fueling:
http://datazap.me/u/solidone/z6-kc1i...mark=1574-1575
CL fuel comp adjusted:
Result:
http://datazap.me/u/solidone/z7-kc1i...zoom=7483-7927
The adjustments to the OL fuel table and Cl fueling compensation did not seem to have too much if any effect on CL fuel target at 0.6 loads. Though once it switches over to OL operation fuelking is right on target.