Quote:
Originally Posted by mav1178
...................2) exhaust is making contact with the car somewhere, either from poor positioning of exhaust, bad hanger placement (bad jig or weld), or broken hanger causing excessive movement
|
@
turtlefeeder ........I'll buy into this theory.
I suggest you put the car back up on the rack, figure out which direction the torqued engine pushes the exhaust pieces, find the potential contact point(s) with something else under the car ......... and here comes the humfrz redneck fix ....... use a crow bar and force the exhaust piece away from the contact point(s) and "wire it over".
humfrz