Quote:
Originally Posted by Kodename47
@ Tor I'll link to my A01G Romraider defs when I'm on a laptop so you can choose which ones you prefer. What files are you trying to flash? OFT with launch control etc or just a normal standard ROM?
It doesn't matter if the tables don't appear in ECUflash, the definitions just point to the table locations so if the info isn't in the definition it is just invisible. |
Questions still open:
1)My car is stock with A00G. I want to flash either OTS 2.076 or Wayne's 1.09 to the car.
Q:
From what I read so far I can flash the A01G version to my 2013/A00G car?
2) I want to use RomRaider to add timing to Waynes 1.09 if using that instead of OTS (tip from Wayne). EU/German fuel is supposedly better than AU (see my log, no knock on stock tune with 34 deg C ambient temperature).
Q:
I suppose your "OFT Manual G series" A01G file will work both for Waynes 1.09 and OFT 2.076?
I might want to experiment with "sound tuning" (exhaust bubble). Or other simple stuff where I can follow guides and slowly learn to use the software. I would need the Overrun tables from your definitions (thank you for your work).
Questions that have been answered:
1) Use Github 32bitbases - leave the other files as they are.
2) The OTS is a true A01G and won't cause me headaches if/when editing.
3) Use Github A01G EcuFlash definition (6 months old) for any A01G tune, no matter what definition was used to edit in RomRaider
(thanks).
Future plans:
After I moved (in 2 months) and get a garage I want to remove the cat from the stock header. Then I want to repeat the above for a stg 2 tune, or depending on how brave I am/how much it catches my interest/how much time I have, might try out working on it myself.
Thanks for helping me out.
Steve99, I don't know what I did to piss you off, I am just looking for advice on the (I suppose) fairly simple questions above. In any case thank you for writing the many guides, which without I would be even more confused.
