Quote:
Originally Posted by stevo585
I actually don't see what you mean. O2 sensor 1 bank 1 is not a choice in torque. I'm going to try to create my own PID using lamda. That does read 1.0 at cruise. So I figure if lambda*14.7 should be close.
|
suppose it depends which version of torque.
Im currently ecutek tune on E85 and the standard afr and commanded afr pids work fine in torque and match up with ecutek logging.
the stock front o2 sensor can be re-calibrated in tune to read down to around 10 AFR quite will.
you might want to confirm the reading with ecutek cable or another logging device