Quote:
Originally Posted by Tectoniic
Disclaimer: I've never used the torque app, I use OFT for logging so I'm just going off of that.
Are you sure you are not confusing AFR with Command AFR? Your ECU may want 12.0(Command AFR) at full throttle but you may actually be at a ~10.5(Measured AFR) or so if you have a problem with the tune or other issues.
|
Torque and the OFT would use the same sensors. I'm logging measured and commanded gives me the same number. I'm custom tuned on ecutek. Nothing gives me any reason why my afr would be off. Car runs and feels fine. The fact that its "reading" 10.x tells me it off. Its not possible the stock sensor maxes around ~11.2.