Quote:
Originally Posted by Kodename47
You can use my defs if you like. They are matched between different definitions, so long as the C series you are copying are based on B01C.
OFT C Series Definitions - Based on B01C
OFT I Series Definition - Based on A01I
There is a table called Port Injection MRP Compensation that will impact the PI under positive pressure.
All load limits etc are defined. |
@
Kodename47, how should this MRP Comp table be changed to compensate for boost pressure? Here is the table I'm currently using. I've found that too much PI knocks a lot more, so I'm using very little PI in the PI/DI tables. Here is the PI/DI table I'm using.