Quote:
Originally Posted by dtek
I did collaborate with Kool but after a while once I'd given a few files, and other iterations, he sent me one tweaked tune and a procede map or two, after that went off on his own tangent. Going on some of the speculative bum-dyno work of most threads he's been in the last year or so, I'm not sure I'd be confident to run a Kool tune these days. 
As to the steps to convert Roms, thanks Steve... I have for quite some time basically followed that approach, and just now have re-checked using Shiv's most recent XML defs and the only tables missing in my tune are several of the P000X check box on-off type of ones. My understanding from reading on here, is that different ROMs have different levels of firmware(?) when it comes to those tables and there's not much I can do about that.
One peculiar thing is, I cross-compared Shiv's v2.10 A00I xml def file with Wayno's WW v106 2016-06-16 A00I xml file and there's significant differences. Shiv's is 800kb in size and 8000+ lines of code, whereas Wayno's is 569kb and 6500 lines of code. I obviously didn't pick through each line by line but seems there's some pretty major differences in there...  |
you shoulnt need to change any cel code stuff unlees they changed a cel code between the stock usa rom and the esc tuned usa rom.
yes for example the usa roms have the evap contol system ective whre our roms dont use evap its not wired in and disabled in our roms good if you want to use flex kits