[steve99]

Originally Posted by brzd

Hi there,

I've been using the OTS stage 2 base map for a while and wanted to learn how to dial it in using Wayno's guide but saw some other's using Shiv's OFH stage 2 uel maps for a gruppe-s header so I thought i'd give it a try cause it's less work... LOL

Can someone take a look? I noticed some knock -0.6~ around 6000k rpm in my 2nd pull

I have a drop in K&N filter, gruppe-s header and everything else practically stock

http://datazap.me/u/brzd/ofh-stage-2-uel?log=0&data=1

http://datazap.me/u/brzd/ofh-stage-2-uel?log=1&data=1

http://datazap.me/u/brzd/ofh-stage-2-uel?log=2&data=1

its looks fine, nothing drastic wrong.

It running a little on the rich side, bit of maf scaling and wayno's load limits will sort it if tour keen. You could try the new OFH maps but they are more aggressive that the standard off the shelf tunes. your just srarting to get slight knock so its likely to get worse on the ofh specific maps