[JimmyMac]

Hello! I'm cleaning out a lot of things I'm not using on my FRS. I'll have more pictures up soon. But for now I'm going to put 2 items up for sale. All items sold as is. PayPal only. Lower 48. PM if interested or have any questions. Thank you for looking.

Crawford BPB. Has all bolts and nuts included in the kit. All 4 orings are good. Ran great while I had them in the car with OFT (not included). Sold

Motiv Concepts black ceramic coated over pipe. Comes with 2 gaskets (used but still in decent shape), 4 bolts, 4 nuts, instructions, and stickers. Sold

P&L EL ceramic coated header with both catted and non catted downpipe and P&L overpipe (non ceramic coated). I'll include the old gaskets and 2 nuts and bolts. Cat is in great shape. Both downpipes have extra bung and plug for A/F sensor/temp. Sold

P&L catted frontpipe. No gaskets or bolts included. Cat is in good shape. Sold

TRD intake. Filter is in decent shape. Only slightly dirty from intake side. No clamps missing. Only thing not included is a cap/plug for the sound generator tube near the firewall. Non issue. Just pull off the sound generator tube. Slight warping on hose side from tight clamping of hose. Sold

SBD Turbo kit. Sold as is. Bov is new and never welded on. Comes with both .5 bar and .7 bar actuators. The .7 is new in box. Also includes stock heat-shield and a small turbo blanket (not shown). Will also include prewelded oil pan. Not included is a tuning option. You will need an Ecutek or OFT plus a tune. You will also need hose for the BOV to a vacuum source and the hose from the turbo to the oil pan. I cut it off but will include a small piece so that you can get one from an autoparts store. Everything else should be complete in the kit (kit gaskets, bolts, etc..) If you have any questions, feel free to PM me. Thanks. Sold


Crawford BPB. Sold


Motiv Overpipe. Sold


P&L Header. Sold





P&L Catted front pipe. Sold




TRD Intake. Sold




SBD Turbo. Sold