Quote:
Originally Posted by BRZHarley
On the topic of the Whiteline bushings and endlinks...
I recently installed a Whiteline 20mm bar with the new greaseless bushing, I decided to try them out and they work great! Greasing them isn't going hurt to anything either...
The clunky noise on the other hand drove me nuts for a week until I determine the cause... The Whiteline bar comes with a nice thick epoxy coating, I found that the coating was preventing a good tightening of the end link to bar connection. The end link to strut was just fine... My resolution was to use an abrasive pad on my air grinder to remove the excess coating around the hole on the bar, took about 5 minutes per side. Once my sons and I cleaned up the bar and retorqued the end end link the clunking was gone and hasn't come back!
Good luck,
Ed
|
Good to know. Mine clunks like crazy too...even have some clunky sounds coming from the rear as well. See if I can't fix it up this weekend.