[euthqt]

Hey guys.

So my issue happens in a couple different scenarios. I'll try to explain it the best I can.

First off, when I shift into second gear, and I am rising in RPMs, the rpm needle always pauses around 2500-3000 rpm for a split second then begins to rise again steadily.

The other scenarios is when I downshift or upshift. So let's say I downshift at 3000rpm. The car rev matches up to 4000, then once I apply a bit of throttle the rpm drops about 200-300 rpm and then begins to rise steadily again.

Does anyone have these issues with the AT FRS/BRZ?

Thanks guys.