Quote:
Originally Posted by adrixe
One question on everyone, just installed mine. And there's one bolt that I had a hard time to tighten. Its the bolt that is closest to the oil pan. Its a tight space and I feel that it will come loose in the near future. What tool did you guys use to get into the tight space?
Sent from my SM-N900W8 using Tapatalk
|
I used a standard size socket, a universal joint, an extension, and a torque wrench. The normal socket wasn't deep enough to let the universal joint insert fully. If I tried a deep socket, it wouldn't fit because it was too long. I just made sure to line things up carefully so that the universal joint wouldn't come out of the socket and torqued the nut to 22 ft/lbs.