|
I'm assuming this part is just the camera itself with a 6" wiring pigtail that goes to a factory harness on the '16 that we don't have on a '13? I assume it's just a +6v or 12v (the old Fujitsu Ten HU puts out 6v to the camera, I had mine wired up with a relay for 12v for my aftermarket camera), a ground, and a video signal, but I have no idea what the pinout is and don't want to fry a $225 camera on a 1-in-3 chance of getting it right the first time. Are there any resources out there, or would anyone be able to take a multimeter to their '16 and help me figure it out? The thread linked above has a picture of the camera installed in the trunk and no further information about it.
|