View Single Post
Old 06-08-2016, 07:32 PM   #19
jwvand02
Senior Member
 
Join Date: Apr 2014
Drives: 2013 SWP BRZ Limited
Location: Louisville, KY
Posts: 159
Thanks: 12
Thanked 47 Times in 34 Posts
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Norinradd View Post
I have no cel. No lights on my dash what so ever. Is there a way to test for vacum leak other than just listening for air leaks while cars running? The motor is spotless. 10,000 miles. So i dont see the maf or throttle body being dirty...? As i said i brought to dealer and they reprogrammed ecu for the idle. They were aware of the issue on many stock frs's but it didnt help
You can spray starter fluid along the intake path and around vacuum hoses, sometimes it works sometimes it doesn't. Another option is to take it to a shop and have it smoke tested. As far as I'm aware, the only vacuum hose that should have been touched is the PCV that routes into the intake right before the throttle body. That would be the first place I'd check.

If you're seeing others have the same issue with the Injen intake, it is quite possibly the problem. If you have access to stock parts to put back on the car, you could answer your question quickly.
jwvand02 is offline   Reply With Quote