View Single Post
Old 06-08-2016, 12:31 AM   #609
DarkSunrise
Senior Member
 
DarkSunrise's Avatar
 
Join Date: Apr 2012
Drives: 22 BRZ (Previously 13 FR-S)
Location: USA
Posts: 5,798
Thanks: 2,187
Thanked 4,243 Times in 2,221 Posts
Mentioned: 48 Post(s)
Tagged: 2 Thread(s)
I was curious today and compared the OFH tune vs. UEL v2.076 in RomRaider, trying to see why it was running leaner. I didn't see any changes in MAF scaling, but the base timing, IAT timing compensation, timing advance, intake/exhaust cam advance and AFR targets had all been tweaked. I'm not an expert but the OFH tune appears to be designed to run leaner and with more ignition timing, but also with additional dialing back of timing to compensate for heat/IATs.

I ended up taking out a little base timing at medium loads in the midrange and at high loads near redline. Drove for an hour afterwards in 90 F weather. No FLKC and minimal KC (random) so things looked pretty good in the logs. Won't know for sure though until I do some repeated pulls later this week.
__________________
"Never run out of real estate, traction, and ideas at the same time."

2022 BRZ Build
2013 FR-S Build
DarkSunrise is offline   Reply With Quote
The Following User Says Thank You to DarkSunrise For This Useful Post:
solidONE (06-08-2016)