Old thread, another member PM'd me about this. Bumping this for anyone who needs info in the future.
I took apart the "chinese" valenti v1 tails like I mentioned earlier. The sealant isn't your typical silicone sealant that most cars have where you just bake it open and pull apart. This one is more of a plastic type of sealant and won't get soft even if you bake it or use a heat gun. I had to use a heatgun and a pick/cutting tool to slice the plastic away to pull it apart.
Also, this is with a tail light that was damaged in an accident. I just wanted to see what was underneath.
http://imgur.com/a/kodfJ
Hope this helps anyone in the future.