Quote:
Originally Posted by Ultramaroon
I forget how long the paint can be allowed to set before it must be sanded if another coat is to be applied. That's really what I meant.
I bet it turns out perfect.
|
Quote:
Originally Posted by turtlefeeder
Lots of people skip prepping in between but you should let the paint settle for at least 45 min, heat gun would come in handy to speed things up. Make sure you wash everything you prep... don't want a Sandy surface due to all the stuff you'll be sanding(dust)
|
Yeah, I'm going to be following the directions on the cans pretty much exactly. I'll probably just use like rust-oleum auto primer for the priming but then I'm using the GrimmSpeed factory match WRB and Clear Coat, and I know a lot of people have used those with very good results in the past.