Quote:
Originally Posted by speedracer38
This is pretty straightforward and fast thing to do.
**This was done on a BRZ with an auto dimming rear view mirror**
5 - This is the connector you are looking for (front view)
6 - Plugin the prongs from the Invisicord as pictured (RED wire bottom right, GREEN wire bottom center) Look how I am holding the piece so you don't do the inverse of my directions -
 |
Good instructions, but to clarify.
There is no bottom right and bottom center. There are only 3 wires, Right, Center, Left. Green Goes to Ground (which is the center wire). The wire you want to connect Red to is the 12V Accessory (which is the black with white stripe).
The remaining wire (which people seem to mistakingly tapping power to), is also black, but that goes to the reverse switch. These mirrors are set up so that when you put the car in reverse, the auto dimming feature turns off, so that it's easy to reverse even in the dark.