Ugh! The OFM + RomRaider have to be some of the least user friendly software I have ever used (I have use a lot of software being an IT guy).
Is there an easy to follow guide that explains how to setup Launch Control?
I have tried multiple times to do this myself, but I cannot figure it out. I am not sure how I would, considering all these "helpful" links give no ounce of how-to.
Examples I have been linked to:
http://www.ft86club.com/forums/showthread.php?t=71157
"Adjusting/Activating Launch control and Flat Foot (no lift) Shift parameters
http://www.ft86club.com/forums/showt...launch+control (Only for Manual vehicles)Note : OFT ROM's have a special patch for these functions use the definition files from the
www.openflashtablet.com website downloads page
Launch Control -LC
Basically a second RPM limiter that is active when the vehicle speed is below the threshold speed set regardless of clutch in/out.
Launch control Disable speed = speed at which Launch RPM is disabled (ie you revert to normal red-line RPM limit 7600) default = 6mph (aprox 10KmH)
Launch Control RPM Delta = Amount to subtract from your Red-line RPM to get you Launch RPM e.g. if LC RPM Delta = 3600 your Launch RPM will be 7600-3600 = 4000 RPM"
This shit links me to a picture stating that LC is available or will be soon. I am not sure how that is a guide.
I would link the link that the above link linked me to, but I already described it.
Is there a link that has an ACTUAL guide on how to setup Launch Control for a 2015 BRZ using the D00C.bin file?!
I have got the D00C to open in RomRaider, but it wasn't easy. Telling it the path results in an error, but if I right click the ACTUAL file and tell it to open with RomRaider, all of a sudden it can open it.
From there, when I expand and click on LC or FFS, nothing is there to change. A little window pops up with no data, and no way to change or adjust anything.
After reading the super help link I was linked to, it sounds like some files won't/don't have LC or cannot be adjusted or enabled? If that sounds confusing, that is what it did to me reading through the super helpful link.
I searched google for it, but it links me to the same 2 crappy posts. None of Shiv's videos go over LC or how to set it up, and all the others on youtube are people labeling their vids "How-to LC" then they show you how they can push their pedal and it has LC enabled...LAME.
Now, it could be me and I am just a freaking moron, but I usually don't have issues figuring software out after a bit of time. This one is very stubborn, though, and i don't want to spend hours figuring it out if setting up LC is as simple as it sounds like it is supposed to be.
Can anyone here help a guy out and type of a quick step by step guide on how to OPEN a bin file that can be edited, and then how to edit it, please, or provide a link that actually helps, that doesn't require me to search through 30028324 pages before I find an answer or piece one together?
Please, and if I am the dummy, I apologize. I just want to setup LC on my damn car, idiot or not.