Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - $600 Brake retrofit, Cadillac ATS brembos, STI rotors.

Felix7007 · 05-16-2016, 10:43 AM

Thanks everyone for the info. I'm ready to pull the trigger if my stock wheels will clear the calipers. I have 20mm spacers on the front also. So my question is, is the problem (if any) with clearing the inside rounded part of the stock wheels or the inside face of the wheel. My 20mm spacers might save me if the issue is clearing the inside face. I have been following this thread

http://forums.nasioc.com/forums/showthread.php?t=2773522&page=9

and people have been showing successful fitting with SOME 17" aftermarket rims. Those who don't fit, the problem is usually not clearing the inside face of the wheel. But like I said, I have 20mm spacers so this may not be an issue. What are people's thoughts?

I'm thinking, if my stock rims can fit over 6pot wilwoods, then this kit surely can work:

05-16-2016, 10:43 AM	#45
Felix7007 Member Join Date: Feb 2014 Drives: Scion FR-S Black Location: Maryland Posts: 50 Thanks: 1 Thanked 11 Times in 9 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Thanks everyone for the info. I'm ready to pull the trigger if my stock wheels will clear the calipers. I have 20mm spacers on the front also. So my question is, is the problem (if any) with clearing the inside rounded part of the stock wheels or the inside face of the wheel. My 20mm spacers might save me if the issue is clearing the inside face. I have been following this thread http://forums.nasioc.com/forums/showthread.php?t=2773522&page=9 and people have been showing successful fitting with SOME 17" aftermarket rims. Those who don't fit, the problem is usually not clearing the inside face of the wheel. But like I said, I have 20mm spacers so this may not be an issue. What are people's thoughts? I'm thinking, if my stock rims can fit over 6pot wilwoods, then this kit surely can work: Last edited by Felix7007; 05-16-2016 at 02:45 PM.