Quote:
Originally Posted by Sgtfluffy16
okay guys need to ask another question my kit is fully on other then my oiling system for the rotex. I installed the cooler and the line to it. Here is my problem. The kit never came with the bracket to mount the resivior back at the battery like the instructions say. also i didn't get 4 hoses to do the plumbing. I got 1 hose measuring 130 inches. If i follow the instructions i will get 2 lines done out of that hose.
So here is the question why do some of you, like @ D-VO have the resivior mounted on the Supercharger mount plate and other have theirs mounted at the back near the battery? If i did the resivior up front on the plate i would just have to find some bolts to mount to the plate and i think the 1 hose should reach to make all 4 lines from there.
Suggestions? Comments? |
I originally had it mounted back by the battery, but after my first Rotrex oil change I found it easier to have the reservoir up front to make the whole process easier.