Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

FRS Justin · 05-15-2016, 06:22 PM

A tube popping off usually results in a high idle... Try reloading map if it still does it go back to original map and try it.. MONITOR AFR and KNOCK CORRECTION if you try old map.. If it does not change look for a open or short to ground on the MAP circuit.
Basically this code is set with throttle open above 10% and and a difference between MAF and MAP correlation.

05-15-2016, 06:22 PM	#2
FRS Justin Senior Member Join Date: May 2014 Drives: 2013 Asphalt FRS Location: San Antonio Posts: 994 Thanks: 693 Thanked 695 Times in 417 Posts Mentioned: 22 Post(s) Tagged: 1 Thread(s)	A tube popping off usually results in a high idle... Try reloading map if it still does it go back to original map and try it.. MONITOR AFR and KNOCK CORRECTION if you try old map.. If it does not change look for a open or short to ground on the MAP circuit. Basically this code is set with throttle open above 10% and and a difference between MAF and MAP correlation. __________________ Instagram FT86PROJECT9S Facebook FT86PROJECT9S 710whp