Quote:
Originally Posted by GeorgeJFrick
I am eagerly awaiting @ 2superblus review of this item.
I use an Aim SoloDL for data capture via obd port; has anyone used the pass thru with success? |
If you're running the SoloDL you'll just need to make sure you get the ACC harness. Avoids the 86Nanny + SoloDL both from pulling power from the OBDII circuit (will pop the OBD fuse).
Communication wise everything will work perfectly fine. The pass-thru is a full 16pin which just acts as an extension for any other devices you want to use. The 86Nanny will run at communication spec for these cars and doesn't spam the network causing any error frames for your other devices. It simply joins the network & talks exactly as the rest of the nodes in the car do.
Bart should have something up soon.