Quote:
Originally Posted by bhbnuckle
Hey Peter
Did you bottemd out with your coils? and did u have LCA for ur rear?
Thanks!
|
Hey,
Fronts: maxed out as in the lower collar (height) is right up against spring preload locking collar (second one). no collars removed.
Rears: maxed out as in I cannot physically thread in anymore into the bottom cup. thread body is still plenty left from height collar to the preload collars but the bottom cup is pretty shallow on ZN6 application.
No LCA. zero toe all around -3 camber fronts and -2.7 camber in the rear.
I am looking at PBM LCA's to lower the back to even out the heights and bring rear camber to about -1.5 ish.
Peter