Quote:
Originally Posted by c4lvinnn
Even if this backpad was thick (some are for low offset wheels if not made up by increasing lip/concave), they would shave and drill the lug holes themselves to around 18mm thickness so you wouldnt need to run longer studs.
|
We are making assumptions based on the fact that the factory knows what they are doing... but some of them don't.
Some wheel brands w/ cheap/poor quality factories have shipped wheels without properly drilled lug seats.
I know, I've seen it come in from Asia on containers and had to scrap entire pallets of wheels because they weren't drilled properly.
-alex