[VerusEric]

To install the splitter, I drilled and tapped holes directly into the crash bar. I also had to modify the mounts slightly and then spray painted them black. I then had to modify the bumper a little with a dremel. Came out fairly clean, you have to look for it being modified.





Pictures of everything together, tidied up.



















Loaded her up on a base map that a friend helped me create and she is doing fine around town and for testing the brake duct kit. I still need to get the clutch installed (waiting for billet fork) and the fuel pump. There are a few other odds and ends as well that I'm likely forgetting.