Quote:
Originally Posted by 7c8
Hey thanks for the reply! Do you happen to know the drop that they're adjusted to from factory? I just received them but will be throwing them on in the Summer.
Also, I just flipped through the manual and it's very clear which parts you need to reuse.
|
When I initially looked at the instructions, I thought it was only in German, so tossed it aside and winged it. Wouldn't recommend that unless you really like re-installing things.
I'm not sure what they're adjusted to from the factory, but they ride really good when you set them as high as Bilstein recommends. This gets you to probably about a 1.25" drop from stock (they're slightly lower than my TRD springs were, but not as low as sportlines). I'm currently at 120mm front and 155mm rear and car rides legitimately better than stock (I've driven my car back to back with a stock car several times now).
I've driven a few cars with ISC N1's and ridden in a car with BC BR's and they both ride MUCH worse than stock. I've been very impressed with the Bilsteins.