Quote:
Originally Posted by slowandcurious05
So...yeah I have these plates installed on tarmac IIs. I played with my alignment for a good while and realized a 2.2 degree adjustment range for my setup with the plates (lowered 20mm). I set it up for a max of -1* with it being adjustable with the plates to -3.2*. I'm going to work this sat to see how this "street" to "track" adjustment affects the toe. Sounds like...not a perfect world from reading the above insight. Probably going to compromise "street" toe for 0* "track" toe.
|
What is your goal for having a street and a track setup? Most people that want less negative camber for the street are doing it out of tire wear concerns, but I would guess that running -1 degree camber with 0.2 degrees toe out will give you more tire wear than -3.2 degrees camber and 0 toe.