Quote:
Originally Posted by Ryan_86
theres like 200+ pages. I got some good info from there. They say that 18x9 will clear the stock struts by a few mm, so i would get some spacers, I just dont know the best width.
looking for a spacer mm balance between
clearing stock struts < (flushed, Front (x) mm, Rear (x) mm,) < sticking out way to far.
|
You can only run about a 3mm spacer on stock studs. Then you'll have to get bolt-on spacers if you don't want to change out wheel studs.
Bolt-on spacers under 20mm will be subject to whether the wheel backpad design can let you use the spacers to begin with.
-alex