[steve99]

Originally Posted by FR-Shred

Today I took my turbo, flex fuel, gauges, and so forth off the car.
Car is almost 100% stock now. still have a danso 265 fuel pump. I reflashed with an ecutek stock rom.

Car wouldn't start for the life of it. Finally got it started and it was a very rough, like 400rpm idle. Then it was going thru this revving like 700-1400 rpm rev all on its own, then mellowed out to 700-800 rpm and was idling like normal.
After a few minutes I pressed the gas and the car just stalled out. I then restarted it and it started back up rough but went to a mellow 700-800 idle again but a lot quicker this time.

CEL P1235 - High Pressure Fuel Pump Circuit

Car did have about e30 left in the tank even after running it very dry. Just to try to get that lower I put in about 4 more gallons of 91 octane.

Car, as I speak is idling, a decent 700-800 idle but haven't tried giving it has again.

What do you guys think the issues might be?

are the port injectors stock or higher flow ones ?
is map sensor stock ?