Quote:
Originally Posted by steve99
Yeah all true, but if you do the start idle for a miniute you seem to be good good to go every time.
|
Probably in your climate
I can leave it to idle for a minute and the cams wont be active as the oil temp isn't hot enough. Drive for 30 seconds to the end of the road and idle again and they'll usually start to work.
It's worth noting that I will allow for the engine to idle for a minute on a cold flash, however if the engine is warm I wait until the cams show signs of movement. If you're using ECUtek then some AVCS parameters log to the nearest degree, others to 1 dp.