View Single Post
Old 04-27-2016, 04:09 PM   #271
PandaSPUR
PandaPandaPandaPandaPanda
 
PandaSPUR's Avatar
 
Join Date: May 2014
Drives: 2015 BRZ Limited CWP
Location: New York City, NY
Posts: 1,432
Thanks: 776
Thanked 697 Times in 438 Posts
Mentioned: 12 Post(s)
Tagged: 1 Thread(s)
Quote:
Originally Posted by DocWalt View Post
I can't speak for the Monosports, but at my height I was at about -1.7 up front without touching my camber plates. I did my rear LCAs at the same time as the coilovers so I don't know what I'd be at with stock LCAs. With stock LCAs before I touched anything, I was at -1.0 and -1.7... Which is pretty awful having that much side to side difference.
Quote:
Originally Posted by GTHachiRoku View Post
How low it is and weight you put in the car will affect it,
but you can easily get 2.5 in the front with the MonoSports.

I'm currently at 3.0 front and 2.5 rear on MonoSports and SPC v2 LCAs.
Alright so it sounds like I should probably be fine, but I'll need to double check with some additional research.

Also sounds like I dont need to roll my fenders, I'll confirm this with the shop that I'm using for suspension install and alignment.

Now the question is back to 17 or 18" and 245 or 255 tires.. hm.
PandaSPUR is offline   Reply With Quote