[Sportsguy83]

Originally Posted by ptuning

I will generally use every map available to write my own custom functions for flex-fuel control, such as:

Closed loop boost control
Boost based on ethanol content
Boost cut based on ethanol content
Boost by Gear
Boost by map switching
Boost by water temperature range (hi and low)
Boost by oil temperature range (hi and low)
(all boost functions work together at once and are all under closed loop boost control on the same flashed ROM)
Closed loop fuel target map and WOT correction based on WB 02 input, etc, etc.

Let's put it this way, if you wanted to create a crazy function where the throttle plate is limited to 50% on left hand turns and a rev limiter of 5k rpms is implemented on right hand turns, this would be possible with ECUTek.

- Toan