Quote:
Originally Posted by tyler_win_photo
By "squeezing" the spring, aka increasing preload you will lose droop and possibly make your car higher. It isn't recommended to use the preload as a means to adjust ride height. If you reduce your preload too much you're going to get some noise from your coilover.
If you want to lower the car more in the rear you can get a lower control arm like stance or voodoo that lower the mounting point of the rear strut, effectively dropping the rear.
|
first of all, thank you
Yup, if I were to "compress" the springs to get the height..I might have done so...
but to "loosen" the spring preload to acheive, would have been a no no.
good to know that compressing would not have helped in this situation
and like you said..
I will be looking for stance, voodoo or PBM LCA's.
Thanks again