Quote:
Originally Posted by cawith
Hi,
So I decided to try scale my closed loop as well now, but I'm not sure about all the settings when loading logs.
Do the ones shown in the screenshot look alright? I don't know why the MAF Voltage Maximum is 32, it was supposed to be 3.2V.
Also, at idle the engine load is below the minimum of 0.2. Should I lower that minimum, so that it counts the idle cells in as well, or is it better to leave that out?
Thanks!  |
yes change the ol/cl voltage to 3.2 not 32
the min load is probably ok at 0.2 but you could try 0.1