Took the day off from work to sort out the slanted intercooler issue (a few post above this one). It was bothering me so I chose to modify my original plan.
The biggest issue is the bracket welded to the Beatrush beam brace. I measured it up and cut a notch in it for the intercooler outlet to fall into. This allows me to level off the intercooler on the driver side. It still slants in but not up... that bothered me the most.
I will either polish or powder coat the Beatrush bar... I like the gold but I'm not sure if powder coat colors can be color-matched like regular paint.
My first impression about the fitment of my Mishimoto oil cooler is that it will work where I want to put it... I just had to turn the bracket around..
I'll post pics soon...
__________________________________________
projekt zeal86 build
zeal.eightsix Facebook
Instagram | zeal.eightsix