I will probably run into issues mating the intercooler outlet to the pipe going to the throttle body because of the angle the intercooler sits at. The way I have it was basically the only way I could get it to fit without touching the surrounding parts. If I raise up the left side... the intercooler contacts the A/C condenser end tank. I'll make adjustments as I move forward in my install... I might have a custom front beam brace welded if the Beatrush doesn't work out.
Polished all the intercooler brackets..
Slanted intercooler and Traction fluid cooler installed. You could see how I pushed down my A/C condenser by slanting the brackets to create space up top.
Polished brackets ready to go...
Placed a spacer between the A/C condenser boss and bracket. I did this to create space... the A/C condenser now sits flush against my Mishimoto performance aluminum radiator.
Very little clearance here...
__________________________________________
projekt zeal86 build
zeal.eightsix Facebook
Instagram | zeal.eightsix