[stockysnail]

I had AR Auto Service give me a corner balance and alignment since I needed it after I installed my RCE Tarmac 2 coilovers. I'm using the oem top hats with the washer/spacer and also have the Whiteline front camber bolts and the Whiteline upper inner bushing (camber correction) KCA326.

Here are the stats of the alignment:
Height front: 375mm rear: 372mm (about 1.5-1.7 inches lower is my guess) It feels low very as well.
Corner weight: LF: 865 RF: 807 LR: 704 RR: 675 LF+RR=1510 RF+LR=1511
Caster front before: Left: 6.11 Right: 6.43
Caster front after: Left 6.39 Right: 6.07
Camber front before: Left: -2.64 Right: -1.67
Camber front after: Left: -2.73 Right: -2.78
Toe front before: Left: .06 Right: .08
Toe front after: Left: .01 Right: .01
Camber rear before: Left: -2.9 Right: -2.79
Camber rear after: Left: -3.1 Right: -2.91
Toe rear before: Left: .16 Right: .10
Toe rear after: Left: .05 Right: .06

I was thinking getting new coilovers would be a minor upgrade and I'd only notice it a little bit. I was also worried that it wouldn't be worth all the $$. I'm very impressed with how amazing the car is handling on the street. I can't wait to push the car in autox and on the track to see how crazy this thing handles. Fall in love with your car again and do what I did!