Quote:
Originally Posted by steve99
Ok that D00C rom is actually a B01C but that should not cause the knock you have oft guys do this calid alteration on quite a number of roms not just this one.
The ignition timing in these new OFT header maps is very aggressive as shiv said, they have added about 2 degrees of timing top end rpm 5000-7000. Your going to need very good 93 fuel to be able to run that and as shiv said its optimized for their ofh header so running a different header may also cause more problems with such an agressive map , shiv also mentioned this.
Its also likely that you IAM logging and FBKC logging and maybe some other parameters are now not working correctly.
The oft should pick up that your actual rom is a B01C and not a D00C, but maybe for some reason its not doing that. Make sure your on the latest Open Flash manager software and update oft via internet. The OFT now auto updates template, dont manually apply old templates you find on forums as it may stuff up the logging
I think the FLKC knock is likely real and you should go back to the older tunes as your fuel or header is causing that knock over 5000 rpm.
maybe talk to oft guys and get them to look at logging on the new D00C tunes as well as it does not seem right for all parameters.
|
I have since gone back to the old D00C stage 2 uel 91 gas tune. Being in AZ we only get 91, E85 or 100(super over priced) When i saw @
Shiv@Openflash post about those OFH tunes running super aggressive. I went and checked the tune out. oooohhh boy its aggressive haha. I loved everything else about it though, as you can see from the logs, everything but WOT top end seemed normal and but that glitch. I'll be working on my old stage2 uel 91 tho, and get that dialed in, then work on my e85 as I want to try that gas out as we have more stations supplying it =D
I have let the tablet update manually when I connect to OFM 1.25.1 right from the start after DL'ing it from their site. I don't know why its not seeing that. Its always said I have had a D00C tune and states that calid on the info upon loading OFM as well. Also wouldn't let me load any other tune on to the tablet as well but the D00C. Says file not compliant for even B01C. (which i figured it would do for safety so I wouldn't brick my ecu im gathering lol) Thanks again @
steve99